差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
后一修订版 		前一修订版
nk-rk3399-v0c_english_notebook [2023/03/09 21:57]
wjj 		nk-rk3399-v0c_english_notebook [2023/03/12 18:01] (当前版本)
wjj
行 18: 行 18:
 {{page>:template:temp_win_server}} {{page>:template:temp_win_server}}
 === System burning === === System burning ===
-{{page>:template:temp_system_English}} 
-=== Serial debugging === 
-{{page>:template:temp_debug_english}} 
-=== Android ADB === 
-{{page>:template:temp_adb}} 
-=== Linux SSH === 
-{{page>:template:temp_SSH_English}} 
  
-==== Android user manual  ==== +1、Download the buring tool： 
-=== Interface function test === +  * Be sure to install the driver first. The burning tool link contains driver DriverAssitant ziitant package, extract it and click DriverInstall.exe to install the driver. 
-== UART == +  
-{{page>:template:temp_android_uart}} +{{:arm:rk3399:3399-shaolu.png?600×365|}}
-== LAN == +
-1. 将网线连接到主板LAN1接口上+
  
-{{:arm:rk3399:android:lan_1.jpg?600|}}+2、Start Burn： 
 +  * Connect one end of the data cable to the OTG of the motherboard and the other end to the computer. Note that before burning, the power should be turned off. Press and hold the boot_key button to burn when the power is turned on.
  
-2. 查看网卡IP地址+{{:arm:rk3399:shaolugujian.png?600|}}
  
- a）点击设置 => 点击更多 +  * Open the development tool in the compressed package, click Upgrade firmware first, then click firmware and select good firmware, and finally click upgrade to start burning.
-   +
-{{:arm:rk3399:android:lan-2.png?600|}} +
-   +
- b）点击Ethernet +
-   +
-{{:arm:rk3399:android:lan-3.png?600|}}+
  
- c）查看IP地址，一般系统默认动态获取IP地址 +{{:arm:rk3399:faxian.png?600|}}
-   +
-{{:arm:rk3399:android:lan-4.png?600|}}+
  
-3. 连接上网络后，打开浏览器浏览网页查看是否连接上网络+  * The state of the burning process, there will be a progress display.
  
-{{:arm:rk3399:android:lan-5.png?600|}}+{{:arm:rk3399:shaoluzhong.png?600|}}
  
-4.设置以太网静态IP地址+  * When changing the system platform (such as switching from Android to Linux), it may fail to burn. At this time, open the development tool, click advanced functions first, and then click into Maskrom to switch the burning mode and then burn the system。
  
- * 点击 Ethernet IP mode 选择 static+{{:arm:rk3399:moshi.png?600×456|}}
  
-{{:arm:rk3399:android:lan-6.png?600|}}+3、Finish burning： 
 +  * There is no need for any operation in the process of burning. After successful burning, the right box will show that the device restarts automatically and the burning is complete.
  
- * 进行设置+{{:arm:rk3399:shaoluwancheng.png?600|}}
  
-{{:arm:rk3399:android:lan-7.png?600|}}+=== Serial debugging === 
 +{{page>:template:temp_debug_english}} 
 +=== Android ADB === 
 +{{page>:template:temp_adb}} 
 +=== Linux SSH === 
 +{{page>:template:temp_SSH_English}}
  
 +==== Android user manual  ====
 +=== Interface function test ===
 +== UART ==
 +{{page>:template:temp_android_uart}}
 +== LAN ==
 +{{page>:template:temp_android_lan_English}}
 == WIFI == == WIFI ==
 {{page>:template:temp_android_wifi_EN}} {{page>:template:temp_android_wifi_EN}}
行 76: 行 72:
 {{page>:template:temp_android_mic}} {{page>:template:temp_android_mic}}
 == USB == == USB ==
-{{:arm:rk3399:android:usb-1.jpg?600|}}+{{page>:template:temo_android_usb_EN}}
 == SDCARD == == SDCARD ==
 {{page>:template:temp_android_sdcard}} {{page>:template:temp_android_sdcard}}
 == Bluetooth == == Bluetooth ==
-1.Open Settings and tap Bluetooth +{{page>:template:temp_acdroid_blurtooth_English}}
- +
-{{:arm:rk3399:android:bluetooth-1.png?600|}} +
- +
-2.With Bluetooth enabled, you can search for nearby Bluetooth devices and select Bluetooth devices for connection. +
- +
-{{:arm:rk3399:android:bluetooth-2.png?600|}}+
 == WatchDog == == WatchDog ==
 {{page>:template:temp_android_watchdog}} {{page>:template:temp_android_watchdog}}
行 233: 行 223:
 3.Open a browser and browse any website. 3.Open a browser and browse any website.
  
-{{:arm:rk3399:linux:baidu.png?600|}}+{{:arm:rk3399:android:android-lan5.png?600|}}
      
 4. The 5G test method is similar to 4G, and the command 5G can be automatically dialed: 4. The 5G test method is similar to 4G, and the command 5G can be automatically dialed:
行 338: 行 328:
 3. To set the Bluetooth connection type: 3. To set the Bluetooth connection type:
  
-{{:arm:rk3399:linux:bt3.png?600|}}+{{:arm:rk3399:linux:rk3399_air10.png?600|}}
 == WatchDog == == WatchDog ==
 {{page>:template:temp_linux_watchdog}} {{page>:template:temp_linux_watchdog}}

您的足迹:

打印/导出