差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
后一修订版 		前一修订版
nk-rk3399-v0c_english_notebook [2023/03/09 17:46]
ljy 		nk-rk3399-v0c_english_notebook [2023/03/12 18:01] (当前版本)
wjj
行 18: 行 18:
 {{page>:template:temp_win_server}} {{page>:template:temp_win_server}}
 === System burning === === System burning ===
-{{page>:template:temp_system_English}}+ 
 +1、Download the buring tool： 
 +  * Be sure to install the driver first. The burning tool link contains driver DriverAssitant ziitant package, extract it and click DriverInstall.exe to install the driver. 
 +  
 +{{:arm:rk3399:3399-shaolu.png?600×365|}} 
 + 
 +2、Start Burn： 
 +  * Connect one end of the data cable to the OTG of the motherboard and the other end to the computer. Note that before burning, the power should be turned off. Press and hold the boot_key button to burn when the power is turned on. 
 + 
 +{{:arm:rk3399:shaolugujian.png?600|}} 
 + 
 +  * Open the development tool in the compressed package, click Upgrade firmware first, then click firmware and select good firmware, and finally click upgrade to start burning. 
 + 
 +{{:arm:rk3399:faxian.png?600|}} 
 + 
 +  * The state of the burning process, there will be a progress display. 
 + 
 +{{:arm:rk3399:shaoluzhong.png?600|}} 
 + 
 +  * When changing the system platform (such as switching from Android to Linux), it may fail to burn. At this time, open the development tool, click advanced functions first, and then click into Maskrom to switch the burning mode and then burn the system。 
 + 
 +{{:arm:rk3399:moshi.png?600×456|}} 
 + 
 +3、Finish burning： 
 +  * There is no need for any operation in the process of burning. After successful burning, the right box will show that the device restarts automatically and the burning is complete. 
 + 
 +{{:arm:rk3399:shaoluwancheng.png?600|}} 
 === Serial debugging === === Serial debugging ===
 {{page>:template:temp_debug_english}} {{page>:template:temp_debug_english}}
行 31: 行 58:
 {{page>:template:temp_android_uart}} {{page>:template:temp_android_uart}}
 == LAN == == LAN ==
-{{page>:template:temp_android_gpio}}+{{page>:template:temp_android_lan_English}}
 == WIFI == == WIFI ==
 {{page>:template:temp_android_wifi_EN}} {{page>:template:temp_android_wifi_EN}}
行 45: 行 72:
 {{page>:template:temp_android_mic}} {{page>:template:temp_android_mic}}
 == USB == == USB ==
-{{:arm:rk3399:android:usb-1.jpg?600|}}+{{page>:template:temo_android_usb_EN}}
 == SDCARD == == SDCARD ==
 {{page>:template:temp_android_sdcard}} {{page>:template:temp_android_sdcard}}
 == Bluetooth == == Bluetooth ==
-1.Open Settings and tap Bluetooth +{{page>:template:temp_acdroid_blurtooth_English}}
- +
-{{:arm:rk3399:android:bluetooth-1.png?600|}} +
- +
-2.With Bluetooth enabled, you can search for nearby Bluetooth devices and select Bluetooth devices for connection. +
- +
-{{:arm:rk3399:android:bluetooth-2.png?600|}}+
 == WatchDog == == WatchDog ==
 {{page>:template:temp_android_watchdog}} {{page>:template:temp_android_watchdog}}
行 76: 行 97:
 === Test Interface === === Test Interface ===
 == GPIO == == GPIO ==
-1.IO - Control Node：/sys/class/io_control+1.IO - Control Node：ls /sys/class/io_control -l
  
-{{:arm:rk3399:linux:rk3399_gpio10.png?600|}}+{{:arm:rk3399:rk3399_gpio23.png?600|}}
  
 2.IO - Corresponding form as follows：   2.IO - Corresponding form as follows：  
行 142: 行 163:
   {{:arm:rk3399:linux:rk3399_uart19.png?600|}}   {{:arm:rk3399:linux:rk3399_uart19.png?600|}}
    
-4. Command line mode test serial port, the same COM2 loopback test, for example+4. Command line mode test serial port, the same COM3 loopback test, for example
  
 Open the terminal and enter the following command to receive data: Open the terminal and enter the following command to receive data:
  
-  com_recv /dev/ttyXRUSB1 115200+  com_recv /dev/ttyXRUSB2 115200
  
 Open another terminal to send data: Open another terminal to send data:
  
-  com_send /dev/ttyXRUSB1 115200+  com_send /dev/ttyXRUSB2 115200
  
 The test result is given as： The test result is given as：
行 182: 行 203:
 1. Click the network icon in the lower right corner to browse the available WIFI routes: 1. Click the network icon in the lower right corner to browse the available WIFI routes:
  
-{{:arm:rk3399:linux:wifi1.png?600|}}+{{:arm:rk3399:rk3399_wifi30.png?600|}}
  
   * Enter your WIFI password and click connect   * Enter your WIFI password and click connect
行 202: 行 223:
 3.Open a browser and browse any website. 3.Open a browser and browse any website.
  
-{{:arm:rk3399:linux:baidu.png?600|}}+{{:arm:rk3399:android:android-lan5.png?600|}}
      
 4. The 5G test method is similar to 4G, and the command 5G can be automatically dialed: 4. The 5G test method is similar to 4G, and the command 5G can be automatically dialed:
行 210: 行 231:
 {{page>:template:temp_linux_can}} {{page>:template:temp_linux_can}}
 == GPIO/DIO == == GPIO/DIO ==
-1.IO - Control Node：/sys/class/io_control+1.IO - Control Node：ls /sys/class/io_control -l
  
-{{:arm:rk3399:linux:rk3399_gpio10.png?600|}}+{{:arm:rk3399:rk3399_gpio23.png?600|}}
  
 2.IO - Corresponding form as follows：   2.IO - Corresponding form as follows：  
行 299: 行 320:
 1. Open the Bluetooth manager and search for nearby Bluetooth devices: 1. Open the Bluetooth manager and search for nearby Bluetooth devices:
  
-{{:arm:rk3399:linux:bt1.png?600|}}+{{:arm:rk3399:rk3399_blue10.png?600|}}
  
 2. Select Bluetooth device, pair and then select Trust: 2. Select Bluetooth device, pair and then select Trust:
  
-{{:arm:rk3399:linux:bt2.png?600|}}+{{:arm:rk3399:rk3399_blue22.png?600|}}
  
 3. To set the Bluetooth connection type: 3. To set the Bluetooth connection type:
  
-{{:arm:rk3399:linux:bt3.png?600|}}+{{:arm:rk3399:linux:rk3399_air10.png?600|}}
 == WatchDog == == WatchDog ==
 {{page>:template:temp_linux_watchdog}} {{page>:template:temp_linux_watchdog}}
行 395: 行 416:
   * Method 2 -- Open preferences -&gt in sequence on the graphical interface; Time and date, select the time zone as shown below:   * Method 2 -- Open preferences -&gt in sequence on the graphical interface; Time and date, select the time zone as shown below:
  
-{{:arm:rk3399:linux:timezone.png?600|}}+{{:arm:rk3399:linux:rk3399_date9.png?600|}}
  
 Close the window and run the date command to view the time zone change: Close the window and run the date command to view the time zone change:
      
- {{:arm:rk3399:linux:timezone1.png?600|}}+{{:arm:rk3399:rk3399_date10.png?600|}}
 == CPU == == CPU ==
 To view CPU information: To view CPU information:

您的足迹:

打印/导出