差别
这里会显示出您选择的修订版和当前版本之间的差别。
| 两侧同时换到之前的修订记录 前一修订版 | |||
|
nk-rk3399-v0c_english_notebook [2023/03/12 18:01] wjj |
nk-rk3399-v0c_english_notebook [2023/03/12 18:01] (当前版本) wjj |
||
|---|---|---|---|
| 行 27: | 行 27: | ||
| * Connect one end of the data cable to the OTG of the motherboard and the other end to the computer. Note that before burning, the power should be turned off. Press and hold the boot_key button to burn when the power is turned on. | * Connect one end of the data cable to the OTG of the motherboard and the other end to the computer. Note that before burning, the power should be turned off. Press and hold the boot_key button to burn when the power is turned on. | ||
| - | {{: | + | {{: |
| * Open the development tool in the compressed package, click Upgrade firmware first, then click firmware and select good firmware, and finally click upgrade to start burning. | * Open the development tool in the compressed package, click Upgrade firmware first, then click firmware and select good firmware, and finally click upgrade to start burning. | ||
