差别

这里会显示出您选择的修订版和当前版本之间的差别。

--- en:stpc-exxx-3568b [2026/11/13 02:22]
wjj Fix grammar issues and replace 3.3 step 5/6 screenshots
+++ en:stpc-exxx-3568b [2026/11/13 02:31] (当前版本)
wjj Swap 3.3 step 5/6 screenshots
@@ 行 810: / 行 810: @@
 **⑤ Confirm the Device Is Recognized**
-When **Found One LOADER Device** appears at the bottom of RKDevTool, the device is recognized:
+After entering Loader mode, check the status bar at the bottom of RKDevTool: **No Devices Found** means the unit is not recognized yet, while **Found One LOADER Device** means it is ready to flash:
-{{wiki:en_flash_loader_found.png?560}}
+{{wiki:en_flash_select_firmware.png?560}}
 If "No Devices Found" keeps showing, go back to step ④ and re-enter, or change the USB port and data cable.
@@ 行 820: / 行 820: @@
 Switch to the "Upgrade Firmware" tab, first click "Firmware" to select update.img, then click "Upgrade":
-{{wiki:en_flash_select_firmware.png?560}}
+{{wiki:en_flash_loader_found.png?560}}
 After flashing reaches 100%, the device reboots automatically; first boot takes about 30 ~ 60 seconds.

您的足迹: • home